Builder Gel Liquid Touch - MILKY WHITE

Builder Gel Liquid Touch – Perfect Self-Leveling Liquid Gel for the No File Technique. No File. Flawless Brush Finish.

Builder Gel Liquid Touch is a perfectly self-leveling liquid builder gel , specially created for technicians who prefer the no-file technique and want a smooth surface straight from the brush. Its fluid texture spreads easily on the nail and levels itself, forming a clean architecture with minimal corrections at the end.

Thanks to its controlled self-leveling, Builder Gel Liquid Touch allows for a balanced structure, with a defined apex and clean sides, reducing working time and the need for filing. It adheres excellently to the adhesion base and remains stable over time, preventing withdrawal or cracking when used correctly and adapted to the nail type.

Attention: The selection and adaptation of products according to the type of nail bed and the specific needs of the client is the sole responsibility of the technician. Our products are not universal and may react differently depending on the characteristics of the nails and the working technique applied. We do not assume responsibility for unsatisfactory results, unwanted reactions or other problems arising from improper use or lack of adaptation of the product to the particularities of each case.

Ideal for:

· maintenance of natural or technical nails
· fast constructions, with minimal or no filing (depending on the working technique)
· no-file technique, for a result as close as possible to the final shape directly from the brush
· surface smoothing and fine corrections of nail architecture
· technicians who prefer liquid textures, perfectly self-leveling, with a smooth final appearance

Key benefits:

· Liquid texture, perfectly self-leveling – levels itself, for a smooth and uniform surface
· Ideal for the no file technique – allows for clean architecture straight from the brush, with minimal filing
· Quick and controlled application – distributes easily on the nail, following the direction given by the brush
· Excellent durability – durable, professional-looking manicures
Very good adhesion – remains stable on the nail, without pulling or cracking when the correct preparation steps are followed

Technical specifications:

· Viscosity: low/medium, liquid texture, perfectly self-leveling
· Self-leveling: high
· Dispersion layer: yes
· Finish: glossy (depending on sealing)
· Polymerization: 60 sec LED (48W) / 120 sec UV
Recommended lamp: 48W, dual wavelength (365 + 405 nm)
We do not recommend using more powerful lamps, as polymerization may not be complete and correct.
· Do not interrupt the polymerization process.
· Professional use

How to use:

1. Nail preparation:
   Degrease the natural nail, gently push back the cuticles and lightly buff the surface to maximize adhesion. Remove any resulting dust and make sure the nail is clean and dry.

2. Application of basic products:
   · Apply Nail Prep and let it air dry.
   · Apply acid or acid-free Primer, depending on the client's needs and sensitivity, and wait for complete drying.
   · Apply a thin layer of Super Adhesive Base and cure in a 48W LED lamp for 60 seconds.

3. Application of Builder Gel Liquid Touch:
   · Pick up an appropriate amount of product with the brush.
   · Place the gel on the nail and distribute it gently, guiding it with the brush towards the apex and sides.
   · Allow the gel to self-level for a few seconds. Position your finger so that the product sits properly, without running into the cuticles or down the sides.
   · Check the apex and cuticle line before curing.

4. Polymerization:
   Cure in the lamp for 60 sec LED (48W) / 120 sec UV, maintaining the correct position of the fingers to preserve the shape.

5. Completion:
   Depending on the working technique and the amount of product applied, filing may be minimal or non-existent (no file). If necessary, remove the dispersion layer, make fine corrections by filing, then apply top coat (glossy or matte) and polymerize according to the instructions of the top used.

CAREFUL:

• For professional use.
• Keep out of reach of children.
• Avoid contact with sunlight.
• The product may cause allergies if it comes into contact with the skin.
• Use gloves during application.
• Store with the lid tightly closed, at temperatures between 15–25°C.
• Images are for informational purposes only; shades and details may vary depending on device settings or production batch.
• Products must be used as directed on the site. Our company assumes no liability for the use of products in any manner other than as recommended.
• We do not guarantee the compatibility of our products with other brands.

Note: Without TPO , contains TMO - a legal, safe and effective option.

Ingredients: A crylates Copolymer, Isobornyl Acrylate, Silica, Dimethicone, Trimethylbenzoyl Ditolylphosphine Oxide (TMO), CI 77891.