Builder Gel Aéra Light - MILKY WHITE

Builder Gel Aéra Light – Perfect Self-Leveling Liquid Mousse for the No File Technique. No File. Intelligent Self-Leveling.

Builder Gel Aéra Light is a mousse-type builder gel with a liquid texture , specially created for technicians who love smooth surfaces straight from the brush and the no-file technique . Its fluid formula, with liquid memory , behaves intelligently during work: at rest it remains stable on the nail, and when it is gently rotated in place, the gel heats up, becomes more fluid and self-levels perfectly , leaving a uniform surface ready for sealing.

It is suitable for both maintenance and quick constructions, as well as for technicians who want to reduce filing time and achieve a clean, professional-finish architecture in fewer steps. It adheres excellently to the adhesive base and remains stable over time, preventing withdrawal or cracking when used correctly and adapted to the nail type.

Attention: The selection and adaptation of products according to the type of nail bed and the specific needs of the client is the sole responsibility of the technician. Our products are not universal and may react differently depending on the characteristics of the nails and the working technique applied. We do not assume responsibility for unsatisfactory results, unwanted reactions or other problems arising from improper use or lack of adaptation of the product to the particularities of each case.

Ideal for:

· maintenance of natural or technical nails
· fast constructions, with minimal or no filing (depending on the working technique)
· surface smoothing and fine corrections of nail architecture
· no-file technique, for clean results straight from the brush
· technicians who prefer liquid, self-leveling textures with a smooth final appearance

Key benefits:

· Liquid mousse texture with liquid memory – stable at rest, becomes more fluid and self-levels when rotated in place
· High self-leveling – smooth surface straight from the brush, with minimal filing
· Suitable for the no file technique – clean architecture, with minimal corrections at the end, depending on the volume and application method
· Good control during application – although it is liquid, the product can be easily guided with the brush, without excessive leakage when dosed correctly
Excellent durability – for durable, professional-looking manicures
Very good adhesion – remains stable on the nail, without pulling or cracking when the correct preparation and application steps are followed

Technical specifications:

· Viscosity: medium to low, liquid mousse type, with liquid memory
· Self-leveling: high (self-leveling, especially during turning on the spot and working with the brush)
· Dispersion layer: yes
· Finish: glossy (depending on sealing)
· Polymerization: 60 sec LED (48W) / 120 sec UV
Recommended lamp: 48W, dual wavelength (365 + 405 nm)
We do not recommend using more powerful lamps, as polymerization may not be complete and correct.
· Do not interrupt the polymerization process.
· Professional use

How to use:

1. Nail preparation:
   Degrease the natural nail, gently push back the cuticles and lightly buff the surface to maximize adhesion. Remove any resulting dust and make sure the nail is clean and dry.

2. Application of basic products:
   · Apply Nail Prep and let it air dry.
   · Apply acid or acid-free Primer, depending on the client's needs and sensitivity, and wait for complete drying.
   · Apply a thin layer of Super Adhesive Base and cure in a 48W LED lamp for 60 seconds.

3. Applying Builder Gel Aéra Light:
   · Pick up an appropriate amount of product with the brush.
   · Place the gel on the nail and let it distribute naturally, gently guiding it with the brush where needed.
   · To activate the liquid memory and the perfect self-leveling effect, work with gentle rotating or rocking movements in place until you notice that the product begins to settle on its own and create a smooth surface.
   · Allow a few seconds for the gel to completely self-level, then check the apex, cuticle line, and sides.

4. Polymerization:
   Cure in the LED lamp for 60 sec (48W) / 120 sec UV, making sure your fingers are positioned correctly to maintain the built shape.

5. Completion:
   Depending on the technique and the amount of product applied, filing may be minimal or non-existent (no file). If necessary, remove the dispersion layer, make fine corrections by filing, then apply top coat (glossy or matte) and cure according to the instructions of the top used.

CAREFUL:

• For professional use.
• Keep out of reach of children.
• Avoid contact with sunlight.
• The product may cause allergies if it comes into contact with the skin.
• Use gloves during application.
• Store with the lid tightly closed, at temperatures between 15–25°C.
• Images are for informational purposes only; shades and details may vary depending on device settings or production batch.
• Products must be used as directed on the site. Our company assumes no liability for the use of products in any manner other than as recommended.
• We do not guarantee the compatibility of our products with other brands.

*Note: No TPO - contains TMO a legal, safe and effective option.

INGREDIENTS: Acrylates Copolymer, Isobornyl Methacrylate, Silica, Trimethylbenzoyl Ditolyphosphine Oxide (TMO), Polyethylene terephathalate. May contain (+/-): CI 77163, CI 77491, CI 77492, CI 77891, CI 77007, CI 77266, CI 15880, Mica (CI 77019).